Marzouk Steel, a reliable manufacturer and supplier in Tunis, Tunisia, deals in DILLIDUR 450V plates and sheets, which are renowned for superior wear resistance and endurance. Our steel solutions with high strength are suitable for heavy machinery, construction, and mining industries, with a high level of performance in severe conditions. Dedicated to quality and advancement, we offer consistent, shock-resistant plates that promote efficiency and lower maintenance costs. At Marzouk Steel, we focus on customer satisfaction through the provision of high-quality products designed to suit industry-specific requirements.
DILLIDUR 450V sheets and plates are steel with abrasion resistance and high strength, composed of carbon (0.20-0.30%), manganese, silicon, chromium, and molybdenum, which increases hardness and wear resistance. They possess a tensile strength of 1400 MPa, yield strength of 1200 MPa, and elongation of 10-12%, providing exceptional toughness. The benefits are excellent wear resistance, high impact toughness, and long service life, thus suitable for mining, construction, and heavy machinery use. These plates enhance effectiveness, cut downtime, and decrease maintenance costs in abrasive environments.
Item: Dillidur 450V
Thickness : 5mm to 150mm
Length : 6,000mm to 12,000mm
Width : 1,500mm to 2,500mm
Heat Treatment: N, Q+T
Surface Point : EP, PE, HDP, SMP, PVDF
| C | Si | Mn | P | S | Mo | Ni | Cu | Cr | V | Nb | B |
| ≤ 0.25 | ≤ 0.70 | ≤ 1.60 | ≤ 0.025 | ≤ 0.010 | ≤ 0.50 | ≤ 0.80 | ≤ 0.30 | ≤ 1.50 | ≤ 0.08 | ≤ 0.05 | ≤ 0.005 |
| Grade | Mechanical Property | Charpy V Impact Test | |||
| DILIDUR 450V | Yield | Tensile | Elongation | Degree | longitudinal |
| Min Mpa | Mpa | Min % | -20 | J | |
| 950 | 1400 | 11 | 35 | ||
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| 1/8″ | 3/8″ | 3/4″ | 1-1/2″ | 3″ |
| 3/16″ | 1/2″ | 1″ | 2″ | 4″ |
| 1/4″ | 5/8″ | 1-1/4″ | 2-1/2″ | Â |
| *1/8″ thick plate is available in one size only 60″x 120″. The 3/6″ thick plate is available only as 48″ x 144″ and 96″ x 144″. | ||||
| Thickness | Width | Length |
| 4 | 2000 | 6000 |
| 5 | 2000 | 6000 |
| 6 | 2000 | 6000 |
| 6 | 2500 | 6000 |
| 8 | 2000 | 6000 |
| 8 | 2500 | 6000 |
| 10 | 2000 | 6000 |
| 12 | 2000 | 6000 |
| 15 | 2000 | 6000 |
| 16 | 2000 | 6000 |
| 20 | 2000 | 6000 |
| 25 | 2000 | 6000 |
| 32 | 2000 | 6000 |
| 40 | 2000 | 6000 |
| 50 | 2000 | 6000 |
| 60 | 1800 | 3400 |
Marzouk Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Tunis, Tunisia.
Copyright 2025 Marzouk Steel. All rights reserved
