Marzouk Steel, based in Tunis, Tunisia, has built a solid reputation as a reliable manufacturer and supplier of top-notch ARCELOR 450 sheets and plates. Known for its cutting-edge manufacturing processes, rigorous quality control, and dedication to meeting international standards, Marzouk Steel offers ARCELOR 450 steel that’s engineered for outstanding wear resistance, impressive strength, and a long lifespan even in tough conditions. These sheets and plates are crafted to endure extreme abrasion and impact while keeping their structural integrity intact. Trusted by various industrial and engineering sectors, Marzouk Steel provides dependable ARCELOR 450 steel solutions for heavy-duty and high-performance applications around the globe.
The ARCELOR 450 sheets and plates from Marzouk Steel are made from high-carbon alloy steel, with carefully controlled amounts of chromium, manganese, and other alloying elements. This specific composition gives them a nominal hardness of about 450 HB, ensuring remarkable abrasion resistance and toughness. Their mechanical properties boast high tensile strength, good yield strength, and excellent impact resistance. Thanks to advanced quenching and heat treatment processes, these plates strike the perfect balance between hardness and ductility. Each plate is put through thorough testing to guarantee consistent quality and reliable performance, even under severe wear and high-stress situations.
Item: ARCELOR 450
Thickness : 5mm to 150mm
Length : 6,000mm to 12,000mm
Width : 1,500mm to 2,500mm
Heat Treatment: N, Q+T
Surface Point : EP, PE, HDP, SMP, PVDF
| Plate Thickness MM | %C Max | %Mn Max | %P Max | %S Max | %SI Max | %Cr Max | %Ni Max | %Mo Max | B Max | CE Max | PCM Max |
| 6.0 – 20.0 | 0.52 | 0.34 | |||||||||
| 21.0 – 40.0 | 0.30 | 1.60 | 0.025 | 0.010 | 0.70 | 1.00 | 0.60 | 0.60 | 0.040 | 0.60 | 0.40 |
| 41.0 – 50.0 | 0.65 | 0.50 |
| Â | Hardness HBW | Typical yield strength MPa, |
| mm | (min – max 1) | not guaranteed |
| 3 – 80 | 425 – 475 | 1100 – 1300 |
| (80) – 100 | 410 – 475 | 1050 – 1300 |
| (100) – 130 | 390 – 475 | 1000 – 1300 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| 1/8″ | 3/8″ | 3/4″ | 1-1/2″ | 3″ |
| 3/16″ | 1/2″ | 1″ | 2″ | 4″ |
| 1/4″ | 5/8″ | 1-1/4″ | 2-1/2″ | Â |
| *1/8″ thick plate is available in one size only 60″x 120″. The 3/6″ thick plate is available only as 48″ x 144″ and 96″ x 144″. | ||||
| Thickness | Width | Length |
| 4 | 2000 | 6000 |
| 5 | 2000 | 6000 |
| 6 | 2000 | 6000 |
| 6 | 2500 | 6000 |
| 8 | 2000 | 6000 |
| 8 | 2500 | 6000 |
| 10 | 2000 | 6000 |
| 12 | 2000 | 6000 |
| 15 | 2000 | 6000 |
| 16 | 2000 | 6000 |
| 20 | 2000 | 6000 |
| 25 | 2000 | 6000 |
| 32 | 2000 | 6000 |
| 40 | 2000 | 6000 |
| 50 | 2000 | 6000 |
| 60 | 1800 | 3400 |
Marzouk Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Tunis, Tunisia.
Copyright 2025 Marzouk Steel. All rights reserved
