Marzouk Steel stands out as a top manufacturer and supplier located in Tunis, Tunisia, focusing on high-quality carbon steel plates specifically designed for critical pressure vessel and sour service applications. They provide SA 516 GR.60N plates that meet NACE and HIC (Hydrogen-Induced Cracking) standards, ensuring safe and reliable performance even in corrosive and high-pressure settings. With state-of-the-art normalizing facilities, rigorous quality control measures, and a team of seasoned experts, Marzouk Steel promises consistent material properties and a dependable supply chain. They cater to the oil and gas, petrochemical, refinery, and power sectors, all while prioritizing safety, compliance, and long-term customer satisfaction.
The SA 516 GR.60N NACE and HIC plates are crafted from carbon steel with a precisely controlled chemical composition that helps resist hydrogen-induced cracking and sulfide stress corrosion. This steel is formulated with optimal levels of carbon, manganese, silicon, and minimal impurities to meet NACE and HIC standards. On the mechanical side, the normalized plates deliver impressive yield and tensile strength, outstanding notch toughness, and stable performance even at low temperatures. These characteristics ensure excellent weldability, pressure resistance, and reliable service in sour environments.
| Grade | ASME SA 516 GR.60N Boiler and Pressure Vessel Steel Plates |
|---|---|
| Width | 1000mm-4500mm |
| Thickness | 5mm-150mm |
| Length | 3000mm-18000mm |
| Supply Condition | As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement. |
| Impact tested | 52° C |
| Tempering | Notch toughness can be improved by quenched cooling from hot rolling or normalizing by the supplier. If such a faster cooling rate is agreed upon between purchaser and supplier then the steel is also to be tempered at 1200 F. |
| Applications | Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service. |
| Process of Manufacturing | Hot-Rolled (HR) |
| C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V |
| 0.20 | 0.4 | 0.95/1.50 | 0.025 | 0.025 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| Tensile strength | Yield strength | Elongation min, % 200 mm (8 in) | Elongation min, % 50 mm (2 in) |
| 415-550 MPa | 250 MPa | 21 | 25 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| British Standard | European Norm | ASTM/ASME | DIN |
| BS1501-161-430A | EN10028 P265GH | A/SA516 – Grade 60 | DIN 17155 HII |
Marzouk Steel is a trusted manufacturer and supplier of high-quality SA 516 GR.60N NACE and HIC Plates​ in Tunis, Tunisia. We specialize in premium steel products, including Alloy Steel, Carbon Steel, Mild Steel and Galvanized Steel, with a strong focus on Carbon Steel Sheet and Plates. Our extensive inventory also includes Pipes, Tubes, Flanges, Forged Fittings and Bars. Committed to fast delivery and exceptional customer service, we use only the finest raw materials to ensure superior strength, durability and performance for critical industrial applications. Contact us today for all your SA 516 GR.60N NACE and HIC Plates​ needs!
You’ll find SA 516 GR.60N NACE and HIC plates commonly used in the construction of pressure vessels and equipment that operate under sour and corrosive conditions. Typical applications include separators, reactors, heat exchangers, storage vessels, and pressure-retaining components in the oil and gas, petrochemical, and refinery industries. This material is also utilized in process equipment that faces hydrogen sulfide and high-pressure situations. Its adherence to NACE and HIC standards guarantees enhanced safety, durability, and a long service life in critical industrial applications.
Marzouk Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Tunis, Tunisia.
Copyright 2025 Marzouk Steel. All rights reserved
